Home / Apps / Stencil
Sheets panelStencil

One view says how the set is annotated. Stencil keeps the others in line.

A drawing set repeats its annotation: the door tags, room tags, notes and dimensions of the general arrangement plan turn up again on the furniture plan, the ceiling plan and the fire strategy — and drift apart the moment one of them is edited. Stencil makes one view the reference and keeps the views you pair with it in line, live, so the tags still follow the model. It checks first, writes nothing until you press Apply, and only ever moves its own work. For what cannot travel live it has two more tabs: Dimensions freezes dimensions so they copy anywhere, and Links records what your tags point at inside a consultant's model, so the next reload does not cost a day of re-tagging.

Revit 2024–2027Checks before it writesOne transaction — one undoYour annotation moves only if you tick it
▶Video guideComing soon on BIMIO’s YouTube
FileArchitectureStructureInsertAnnotateViewManageAdd-InsModify
The BIMIO tab: the apps, each with its own licence.
Why Stencil exists

The same annotation, drawn again on every plan of the set.

Copying places it once. Nothing tells you when the copies stop matching.

By hand
  • Copy, paste aligned to the selected views, view after view — then look for what did not come across.
  • Open every plan before an issue to see whether its tags still match the GA plan.
  • Redraw by hand, in every view, the dimension Revit will not copy.
  • Re-tag the consultant's elements after every reload of their model.
With Stencil
  • A named set says which view leads and which follow; Check reports each view in one line.
  • Missing, displaced, wrong type, orphaned — ticked for you. Your own annotation only if you tick it.
  • Dimensions frozen into one detail group that copies into any view of the same type.
  • Record now before the reload; afterwards Rescue puts each tag back on what replaced its host.
Keeping a set in line

Pair the views. Check. Apply what you agree with.

Everything up to Apply only reads the model. What Stencil places carries its signature, so a run can be repeated, taken back or checked again tomorrow — and what you drew by hand is never moved unless you tick it.

Pair them

One view leads. The views you are about to issue follow it.

Reference… picks the view the others follow — any view, not just the one you have open. Target views… picks the followers, in the suite's picker with its presets and an Active view box that means whichever view is open when you press Check. Or press Target sheets…, pick the sheets going out on Friday, and Stencil takes the views placed on them, leaving schedules and legends out; the check then names the sheet each view sits on. Save as set… names the pairing and stores it in the model, so anyone who opens the project finds it and can re-run it before every issue. The Sets card lists the sets with their state, how many views follow each one and what your last check found, with Check and Apply on every row; with two or more, — every set — checks them all at once, the pass to run before issuing. And the card folds when the results need the room — folded, it still names the set you are on.

New to Revit: a pairing of views that lives in the model and is checked again before every issue.
Reference…
Select views
Which view should the others follow?
Everything in it — tags, room tags, dimensions, text, detail items — is what the target views get compared against. It does not have to be the view you have open.
CancelDone
Save as set…
BIMIO
Name this set
It is stored in the model, so whoever opens the project finds the same pairing. Something like "Floor plans" or "North facade".
L01 — GA Plan
CancelOK
Choose what it carries

A set keeps the categories you choose — in the type each scale needs.

Categories… reads the reference and lists the categories of annotation Sync can carry from it, with how many of each. Untick one and the set leaves it alone in every target: nothing of it is placed, moved, removed or reported, and what Stencil placed before stays where it is. Fifteen views of one floor can keep their door tags in line without dragging the reference's notes and detail lines along. The choice is stored on the set, in the model; a category that turns up in the reference later is in until you untick it, and every check says what was left out. Beside it, Types… answers the other half: what Sync shares is the position, not the type — a reference at 1:200 and a target at 1:100 want different text types — so you set one default for every target and give the odd view out its own.

New to Revit: a sync that carries the door tags and leaves the notes alone.
Stencil — categories in this set
Which categories does this set keep in line?
These are the categories of annotation the reference view holds. Untick one and this set leaves it alone in every target: nothing of it is placed, moved, removed or reported. What Stencil placed before stays where it is. A category that turns up in the reference later is in until you untick it.
CategoryIn the reference
Dimensions8
Door Tags14
Lines23
Room Tags9
Text Notes6
Window Tags11
4 of 6 categories in the syncCancelSave
Stencil — types in the targets
Which type should the targets wear?
What Sync shares is the POSITION. The type does not have to travel with it — a reference at 1:200 needs a different text type from the same layout at 1:100, or the text comes out the wrong size on paper. The app does not reason about scale — you choose the substitution and it applies to every target view in this set. Leave a row on “same as the reference” and nothing changes.
ConfiguringAll target views (the default)
CategoryIn the referenceIn the targets
Door TagsM_Door Tag : Standard— same as the reference —
Room TagsM_Room Tag : Name and NumberM_Room Tag : Name only
Text Notes2.5mm Arial1.8mm Arial
Window TagsM_Window Tag : Standard— same as the reference —
2 of 4 substituted hereClearCancelSave
Check

One line per view: what is missing, what has drifted, what somebody drew by hand.

Check reads every target view against the reference and writes nothing. By view gives one line per target view — the issue-day question — with the sheet it sits on and what differs, counted. By annotation reads the same rows the other way: one line per annotation of the reference, so twelve views missing the same tag is one line. Detail ▸ opens a view row by row, grouped by verdict, worst first — Missing, Orphaned, Displaced, Wrong type — and a copy Sync placed in a view that does not draw it reads Not drawn here, with the reason in Revit's own words (a category switched off by the view template, a hidden element, a filter), instead of being placed again on top. Whatever Sync could not carry is named under the table rather than skipped. The window floats beside the drawing: Show opens the view in Revit and selects what the line is about.

New to Revit: a sheet-by-sheet answer to “is anything out of line before we issue?”
BIMIO · Stencil — Annotation in line
Stencil
Keep one view's annotation in line with another.
SyncDimensionsLinks
What Stencil does — and the one rule that makes it safe
Keeps other views in line with a reference — live, so the tags still follow the model. · checked · 3 views out of line
Sets
Save as set…Rename…Types…Categories…Delete
SetStateReferenceFollowsTypesLast checkActions
— not saved —not checkedL01 — GA Plan6—CheckApply
Core sections⚠ 1 view also in another set · not checkedCore — Section AA4—CheckApply
Ground floor — GA⚠ 1 view also in another set · all in line · 2 days agoL00 — GA Plan52CheckApply
Level 01 — GA3 of 6 out of lineL01 — GA Plan623 of 6 out of lineCheckApply
— every set —not checkedeach against its own15—CheckApply
Reference: L01 — GA Plan
6 target views: L01 — Furniture layout, L01 — Ceiling plan, L01 — Fire strategy, L01 — Setting out and 2 more · 2 categories left out
Reference…Target views…Target sheets…
Nudge apart anything that lands on top of something
By viewBy annotation3 of 6 views out of line — 18 ticked (1 to delete)↶ Undo last run (9)Report…CheckApply 18
ViewOn sheetWhat differsActions
L01 — Furniture layoutA-12111 missing · 2 displacedDetail ▸
L01 — Ceiling planA-1411 missing · 1 orphanedDetail ▸
L01 — Fire strategyA-1812 missing · 1 displaced · 1 yours, elsewhereDetail ▸
L01 — Setting outA-111In line (24)Detail ▸
L01 — FinishesA-131In line (19) · 6 frozen dimensionsDetail ▸
L01 — Drainage overlayNothing to carry hereDetail ▸
Not carried — 1 reason
ShowAccept…To reference…Delete… (3)Select allClose
Yours stays yours

Stencil signs what it places. Everything else is yours.

The one rule: Stencil only ever moves or removes its own work — what you drew is never moved, retyped or deleted unless you tick it yourself. A copy you dragged since reads Yours and stays put. Annotation drawn by hand that mirrors nothing in the reference reads Yours only — reported, because a view is not in line while something in it is outside the sync, but never touched by Apply or by Select all. It has three answers: Accept… records that it belongs, on the annotation, with your name and the date; To reference… copies it up when the reference is the one behind; Delete… removes it, as a gesture of its own that never travels through Apply. And when your own tag sits somewhere other than where the reference has it, the row reads Not ours and opens unticked. Tick it and it is replaced: yours is deleted and a copy of the reference's goes where the reference has it, with its type and leader. Ticking a whole view never sweeps those rows in.

New to Revit: a sync that asks before it touches your layout — and replaces it when you say so.
BIMIO · Stencil — Annotation in line
SetsLevel 01 — GA · Reference: L01 — GA Plan
By viewBy annotation3 of 6 views out of line — 18 ticked (1 to delete)↶ Undo last run (9)Report…CheckApply 18
Annotates
Missing2
Doors · 0915 x 2134mm [D-104]
1.04 · Office
Displaced1
1.05 · Store
Yours only1
2 annotations of your own
In sync14
Not ours1
1.07 · MeetingAn annotation you placed, 2.3 mm away. Untouched unless you tick it — ticked, it is REPLACED: yours is deleted and a copy of the reference's goes where the reference has it, with its type and leader.
ShowAccept…To reference…Delete… (3)BackSelect allClose
Accept…
Select annotations
What is deliberate here?
Ticked means ACCEPTED: the check stops reporting it, because you have looked and it belongs. Unticking one puts it back in the report. Nothing is deleted or moved — it only records the judgement, on the annotation itself, with your name and today's date, so anyone opening the model sees the same decision. An orphan you accept is KEPT: Apply stops offering to delete it. Search a view's name to work through one view at a time.
CancelDone
Delete…
Select annotations
Delete annotation that mirrors nothing
These 3 were drawn by hand in the target views, in categories the reference also uses, and match nothing there — so nothing keeps them up to date and nothing checks them. Search a view's name to take one view at a time.
They are NOT Sync's own work: this is the one action here that removes what a person drew. If the reference is the one that is behind, close this and fix the reference instead.
CancelDone
Apply

One confirmation that counts everything, one transaction, one undo.

The rows Sync can act on without a judgement call open ticked, and Apply carries their number. The confirmation counts what will happen — places, moves, deletions, across how many views — and every kind of deletion gets a paragraph of its own: the orphans and spare copies Sync placed itself, and any Not ours row you ticked, which replaces your own annotation. Nudge apart moves a copy off annotation you drew in that view, never the other way round, never one copy against another, never out of the view's sight. Afterwards only the views it wrote are read again. And the run is recorded in the model, so ↶ Undo last run still takes it back after you have saved and reopened — keeping whatever has been moved by hand since.

New to Revit: an undo for a batch of annotation that survives a save.
BIMIO
Stencil · Sync
Place 14 · move 3 · DELETE 1, across 3 view(s).
The 1 deletion is an orphan — annotation SYNC ITSELF placed from the reference view, whose original has since been deleted there, so it can never be updated again. Nothing you drew yourself is ever deleted; anything without Sync's stamp is refused at the moment of writing, not just filtered out here.
It all happens in one transaction: Ctrl+Z undoes the lot.
CancelApply and delete 1
The table is a photograph

Change the reference with Stencil open, and Stencil says so.

A check is the model at one moment. After every check Stencil watches what it read — the reference, the targets, the elements it looked at — and ignores its own writes. Edit the reference and an amber card appears above the table: the reference view has changed since this check, with how many changes, and a Check button on the card. Press Apply over a stale table and Stencil refuses — the table no longer says what Apply would do, so it could place what the reference no longer has, or miss what was added — and offers to check again. A full check puts the card away.

New to Revit: a results table that admits when it has gone out of date.
BIMIO · Stencil — Annotation in line
SetsLevel 01 — GA · Reference: L01 — GA Plan
By viewBy annotation3 of 6 views out of line — 18 ticked (1 to delete)↶ Undo last run (9)Report…CheckApply 18
⚠The reference view has changed since this check — 2 change(s) there. The table still shows the model as it was: check again before applying.Check
ViewOn sheetWhat differsActions
L01 — Furniture layoutA-12111 missing · 2 displacedDetail ▸
L01 — Ceiling planA-1411 missing · 1 orphanedDetail ▸
BIMIO
Stencil · Sync
The model has changed since this check, so the table no longer says what Apply would do — it could place what the reference no longer has, or miss what was added. Check again, look at the new table, then apply.
CancelCheck again
Dimensions

The dimension that will not copy, frozen into one group.

A dimension's witnesses do not always resolve in another view, so Revit refuses some copies. The Dimensions tab freezes them: select the dimensions in Revit — the window floats and counts them as you click — and Freeze rebuilds each linear one on invisible detail lines placed where the view draws them, so it measures itself. Spot, radial, diameter, angular and arc dimensions are baked to text showing what they display today. Everything frozen is gathered in one detail group per view — one element, not dozens of loose lines — and that group is what Also copy the frozen dimensions into other views copies into views of the same type. An original is removed only once its frozen copy is drawn; one lying wholly outside the crop region is left as it was, and named. The price is on the tab in amber: a frozen dimension is static. So it is marked — the Sync check counts it, the report lists it, and Lens says what it read on the day and who froze it.

New to Revit: dimensions you can replicate across views, with the price stated up front.
BIMIO · Stencil — Annotation in line
Stencil
Keep one view's annotation in line with another.
SyncDimensionsLinks
What Stencil does — and the one rule that makes it safe
Rebuilds a dimension on invisible detail lines so it measures itself — it will then copy to any view, and it will never follow the model again.
9 dimensions selected
Linear ones will be rebuilt on invisible detail lines and the originals removed. Anything that cannot be rebuilt is baked to text with the value it shows today, and you are told which. Everything frozen is gathered in one detail group, so the view holds one element — and so does each view it is copied into.
Also copy the frozen dimensions into other views
A frozen dimension is static
It measures its own invisible lines, so it will NOT follow the model — move the wall and the number stays. Spot, radial, diameter, angular and arc dimensions cannot be rebuilt at all: those are baked to text showing what they display today, all-or-nothing per chain. If you want annotation that keeps up with the model, that is the Sync tab, which handles tags rather than dimensions.
Everything frozen is marked, so nobody has to take your word for it later: the Sync check reports “N frozen” in any view that holds some, the exported report has its own section for them, and clicking one in Lens says what it read on the day it was frozen and who froze it.
CloseFreeze
Copy it on
Select views
Copy the frozen dimensions into…
Same view type only: a frozen dimension is drawn in the view's own plane, so it lands where it was placed. Leave empty to just freeze here.
CancelDone
Told, not hidden
BIMIO
Stencil · Dimensions
Rebuilt 7 · baked to text 1 · copied into 3 view(s).
Dimension — it lies wholly outside the view's crop region, where a frozen copy has nothing to hold on to and would not be drawn; left as it was.
OK
Links

Record the tags before the consultant's reload. Rescue them after.

Tags on a linked model point at elements the consultant's next issue replaces. Before the reload, Record now writes down what every tag in the chosen views points at — category, family, type, Mark, position and level — and re-running it refreshes rather than duplicates. After the reload, Check reads the tags against the new model and groups them by what Rescue would do: Re-point when the replacement is identified beyond doubt (the same Mark where it was recorded, or the same type within 50 mm), ticked; Re-point (unsure) when it is only the nearest of its category, left unticked for you to look at; No match, reported rather than guessed; Healthy, still pointing at a live element. Rescue re-points the ticked tags in one transaction, each keeping its position, its type and its leader — the layout is the work being saved.

New to Revit: tags on a linked model that survive the consultant's next issue.
BIMIO · Stencil — Annotation in line
Stencil
Keep one view's annotation in line with another.
SyncDimensionsLinks
What Stencil does — and the one rule that makes it safe
Record what your tags point at inside a linked model BEFORE it is reloaded, so afterwards they can be put back on the elements that replaced their hosts.
3 views: L01 — GA Plan, L01 — Ceiling plan, L01 — Fire strategy
Every tag here that points into a link is recorded. A reload is survivable.
Views…Record now
Tags Revit DELETED outright when the link reloaded cannot be listed — the anchor goes with the tag. Rescue right after reloading, before anything else touches the model, and the surviving ones are all recoverable.
3 to rescue (1 unsure) · 1 with no match · 2 healthy — 2 tickedTick the sure onesCheckCloseRescue
BIMIO
Stencil · Links
Re-point 2 tags at the elements that replaced their hosts. Each keeps its position, its type and its leader — that layout is the work being saved.
One transaction: Ctrl+Z undoes the lot.
CancelRescue 2
Report

The record that the set was in line on the day it went out.

Report… saves the check as one self-contained HTML file, written in the language the suite is set to. It opens on the verdict, lists every view worst first, then what is frozen, what was accepted and by whom, and what the check could not do and why — and it ends by saying that it changed nothing in the model. With a Stencil licence, Lens carries the same knowledge to whatever you click: whether Stencil placed an annotation and which view it follows, that a dimension is frozen and no longer follows the model, or which set a view leads or follows.

New to Revit: proof, kept with the issue, that every plan matched its reference.
stencil-check-Snowdon Towers Sample Architecture-20261113-1042.html
3 of 6 views out of line with the reference
!DRIFT · L01 — Furniture layout (A-121) — 11 missing · 2 displaced
▲STATIC · 6 frozen dimensions in L01 — Finishes — these do not follow the model
✓OK · 2 annotations accepted as deliberate, with who accepted them

Issue the set with every plan saying the same thing.

Stencil sits on the Sheets panel of the BIMIO tab, with a licence of its own. Pair the views once, check before every issue, apply what you agree with. Revit 2024–2027, full trial, no card.

← PreviousRoom Sheets