A drawing set repeats its annotation: the door tags, room tags, notes and dimensions of the general arrangement plan turn up again on the furniture plan, the ceiling plan and the fire strategy — and drift apart the moment one of them is edited. Stencil makes one view the reference and keeps the views you pair with it in line, live, so the tags still follow the model. It checks first, writes nothing until you press Apply, and only ever moves its own work. For what cannot travel live it has two more tabs: Dimensions freezes dimensions so they copy anywhere, and Links records what your tags point at inside a consultant's model, so the next reload does not cost a day of re-tagging.
Copying places it once. Nothing tells you when the copies stop matching.
Everything up to Apply only reads the model. What Stencil places carries its signature, so a run can be repeated, taken back or checked again tomorrow — and what you drew by hand is never moved unless you tick it.
Reference… picks the view the others follow — any view, not just the one you have open. Target views… picks the followers, in the suite's picker with its presets and an Active view box that means whichever view is open when you press Check. Or press Target sheets…, pick the sheets going out on Friday, and Stencil takes the views placed on them, leaving schedules and legends out; the check then names the sheet each view sits on. Save as set… names the pairing and stores it in the model, so anyone who opens the project finds it and can re-run it before every issue. The Sets card lists the sets with their state, how many views follow each one and what your last check found, with Check and Apply on every row; with two or more, — every set — checks them all at once, the pass to run before issuing. And the card folds when the results need the room — folded, it still names the set you are on.
Categories… reads the reference and lists the categories of annotation Sync can carry from it, with how many of each. Untick one and the set leaves it alone in every target: nothing of it is placed, moved, removed or reported, and what Stencil placed before stays where it is. Fifteen views of one floor can keep their door tags in line without dragging the reference's notes and detail lines along. The choice is stored on the set, in the model; a category that turns up in the reference later is in until you untick it, and every check says what was left out. Beside it, Types… answers the other half: what Sync shares is the position, not the type — a reference at 1:200 and a target at 1:100 want different text types — so you set one default for every target and give the odd view out its own.
| Category | In the reference | |
|---|---|---|
| Dimensions | 8 | |
| Door Tags | 14 | |
| Lines | 23 | |
| Room Tags | 9 | |
| Text Notes | 6 | |
| Window Tags | 11 |
| Category | In the reference | In the targets |
|---|---|---|
| Door Tags | M_Door Tag : Standard | — same as the reference — |
| Room Tags | M_Room Tag : Name and Number | M_Room Tag : Name only |
| Text Notes | 2.5mm Arial | 1.8mm Arial |
| Window Tags | M_Window Tag : Standard | — same as the reference — |
Check reads every target view against the reference and writes nothing. By view gives one line per target view — the issue-day question — with the sheet it sits on and what differs, counted. By annotation reads the same rows the other way: one line per annotation of the reference, so twelve views missing the same tag is one line. Detail ▸ opens a view row by row, grouped by verdict, worst first — Missing, Orphaned, Displaced, Wrong type — and a copy Sync placed in a view that does not draw it reads Not drawn here, with the reason in Revit's own words (a category switched off by the view template, a hidden element, a filter), instead of being placed again on top. Whatever Sync could not carry is named under the table rather than skipped. The window floats beside the drawing: Show opens the view in Revit and selects what the line is about.

| Set | State | Reference | Follows | Types | Last check | Actions |
|---|---|---|---|---|---|---|
| — not saved — | not checked | L01 — GA Plan | 6 | — | CheckApply | |
| Core sections | ⚠ 1 view also in another set · not checked | Core — Section AA | 4 | — | CheckApply | |
| Ground floor — GA | ⚠ 1 view also in another set · all in line · 2 days ago | L00 — GA Plan | 5 | 2 | CheckApply | |
| Level 01 — GA | 3 of 6 out of line | L01 — GA Plan | 6 | 2 | 3 of 6 out of line | CheckApply |
| — every set — | not checked | each against its own | 15 | — | CheckApply |
| View | On sheet | What differs | Actions | |
|---|---|---|---|---|
| L01 — Furniture layout | A-121 | 11 missing · 2 displaced | Detail ▸ | |
| L01 — Ceiling plan | A-141 | 1 missing · 1 orphaned | Detail ▸ | |
| L01 — Fire strategy | A-181 | 2 missing · 1 displaced · 1 yours, elsewhere | Detail ▸ | |
| L01 — Setting out | A-111 | In line (24) | Detail ▸ | |
| L01 — Finishes | A-131 | In line (19) · 6 frozen dimensions | Detail ▸ | |
| L01 — Drainage overlay | Nothing to carry here | Detail ▸ |
The one rule: Stencil only ever moves or removes its own work — what you drew is never moved, retyped or deleted unless you tick it yourself. A copy you dragged since reads Yours and stays put. Annotation drawn by hand that mirrors nothing in the reference reads Yours only — reported, because a view is not in line while something in it is outside the sync, but never touched by Apply or by Select all. It has three answers: Accept… records that it belongs, on the annotation, with your name and the date; To reference… copies it up when the reference is the one behind; Delete… removes it, as a gesture of its own that never travels through Apply. And when your own tag sits somewhere other than where the reference has it, the row reads Not ours and opens unticked. Tick it and it is replaced: yours is deleted and a copy of the reference's goes where the reference has it, with its type and leader. Ticking a whole view never sweeps those rows in.
| Annotates | |
|---|---|
| Missing2 | |
| Doors · 0915 x 2134mm [D-104] | |
| 1.04 · Office | |
| Displaced1 | |
| 1.05 · Store | |
| Yours only1 | |
| 2 annotations of your own | |
| In sync14 | |
| Not ours1 | |
| 1.07 · MeetingAn annotation you placed, 2.3 mm away. Untouched unless you tick it — ticked, it is REPLACED: yours is deleted and a copy of the reference's goes where the reference has it, with its type and leader. | |
The rows Sync can act on without a judgement call open ticked, and Apply carries their number. The confirmation counts what will happen — places, moves, deletions, across how many views — and every kind of deletion gets a paragraph of its own: the orphans and spare copies Sync placed itself, and any Not ours row you ticked, which replaces your own annotation. Nudge apart moves a copy off annotation you drew in that view, never the other way round, never one copy against another, never out of the view's sight. Afterwards only the views it wrote are read again. And the run is recorded in the model, so ↶ Undo last run still takes it back after you have saved and reopened — keeping whatever has been moved by hand since.
A check is the model at one moment. After every check Stencil watches what it read — the reference, the targets, the elements it looked at — and ignores its own writes. Edit the reference and an amber card appears above the table: the reference view has changed since this check, with how many changes, and a Check button on the card. Press Apply over a stale table and Stencil refuses — the table no longer says what Apply would do, so it could place what the reference no longer has, or miss what was added — and offers to check again. A full check puts the card away.
| View | On sheet | What differs | Actions | |
|---|---|---|---|---|
| L01 — Furniture layout | A-121 | 11 missing · 2 displaced | Detail ▸ | |
| L01 — Ceiling plan | A-141 | 1 missing · 1 orphaned | Detail ▸ |
A dimension's witnesses do not always resolve in another view, so Revit refuses some copies. The Dimensions tab freezes them: select the dimensions in Revit — the window floats and counts them as you click — and Freeze rebuilds each linear one on invisible detail lines placed where the view draws them, so it measures itself. Spot, radial, diameter, angular and arc dimensions are baked to text showing what they display today. Everything frozen is gathered in one detail group per view — one element, not dozens of loose lines — and that group is what Also copy the frozen dimensions into other views copies into views of the same type. An original is removed only once its frozen copy is drawn; one lying wholly outside the crop region is left as it was, and named. The price is on the tab in amber: a frozen dimension is static. So it is marked — the Sync check counts it, the report lists it, and Lens says what it read on the day and who froze it.

Tags on a linked model point at elements the consultant's next issue replaces. Before the reload, Record now writes down what every tag in the chosen views points at — category, family, type, Mark, position and level — and re-running it refreshes rather than duplicates. After the reload, Check reads the tags against the new model and groups them by what Rescue would do: Re-point when the replacement is identified beyond doubt (the same Mark where it was recorded, or the same type within 50 mm), ticked; Re-point (unsure) when it is only the nearest of its category, left unticked for you to look at; No match, reported rather than guessed; Healthy, still pointing at a live element. Rescue re-points the ticked tags in one transaction, each keeping its position, its type and its leader — the layout is the work being saved.

| View | Pointed at | |
|---|---|---|
| Re-point2 | ||
| L01 — GA Plan | Concrete column : 450 x 600mm [C-12] | |
| L01 — Ceiling plan | Concrete column : 450 x 600mm [C-14] | |
| Re-point (unsure)1 | ||
| L01 — Fire strategy | Concrete column : 400 x 400mm | |
| No match1 | ||
| L01 — GA Plan | Concrete beam : 300 x 600mm [B-07] | |
| Healthy2 | ||
Report… saves the check as one self-contained HTML file, written in the language the suite is set to. It opens on the verdict, lists every view worst first, then what is frozen, what was accepted and by whom, and what the check could not do and why — and it ends by saying that it changed nothing in the model. With a Stencil licence, Lens carries the same knowledge to whatever you click: whether Stencil placed an annotation and which view it follows, that a dimension is frozen and no longer follows the model, or which set a view leads or follows.
Stencil sits on the Sheets panel of the BIMIO tab, with a licence of its own. Pair the views once, check before every issue, apply what you agree with. Revit 2024–2027, full trial, no card.